|
 |
 |
|
Duro Dyne Sheet Metal |
||||||||||||||||||||||||
|
Duro Dyne Adhesive Applicators |
|||||||||||||||||||||||||
|
|
|
SUPER SPRAYFAST ADHESIVE APPLICATOR (For use with WIT and WSA adhesives) The Super Sprayfast is an air powered adhesive spray system designed for use with 5 gallon or 55 gallon containers of water based adhesives. The Super Sprayfast incorporates an Acetal / Teflon diaphragm pump, circulating system and surge tank. It requires 60-70 PSI. ITEM #5150 - 5 GALLON SYSTEM ITEM #5155 - 55 GALLON SYSTEM |
|||||||||||||||||||||||
|
|
|
The GBAC applies Duro Dyne WIT or WSA water base adhesive to insulation in preparation for application to sheet metal. It requires 110v service fused for 15 amps. Asource of air is required. Specify the direction of work flow when ordering. ITEM #39171 - L TO R FLOW |
|||||||||||||||||||||||
|
|
Water-based Insulation Adhesive specifically designed for Spray, Roller and Brush application. WIT is white in color when applied but dries clear for a clean look. WIT features good wet tack, is non-flammable both in the wet and dry state and is classified by UL (file#R5286). Available in 1 gallon pails, 5 gallon pails and 55 gallon drums. ITEM #5056
|
||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||
| |Welcome| |Weld Type Fasteners| |Gold Seal Pins| |Mechanical Type Fasteners| |Adhesive Applicators| |Insulation Cutters| |Installation Machines| |Spot Welder| | |||||||||||||||||||||||||
