|
 |
 |
|
Duro Dyne Sheet Metal |
||||||||||||||||||||||||
|
Duro Dyne Insulation Cutters |
|||||||||||||||||||||||||
|
|
|
LSU LINER SIZER (For use with 1/2" to 2" liner) Duro Dyne’s LSU Advanced Liner Sizer is an enhanced version of the popular Model LS5 making it capable of cutting the new cotton fiber insulations, filter media and rubberized products. The cross cut and slitter blades are mechanically gear driven to spin while cutting. This spinning action shears the material to create precise cuts in the most difficult materials. ITEM #28076 |
|||||||||||||||||||||||
|
|
|
The LS5 is a manual insulation cutter that slits fiberglass insulation to length and width. The operator feeds the insulation with a crank handle to the desired length. An adjustable slitter blade automatically cuts to desired width. The operator then pulls the crosscut blade across the machine and removes the sized insulation. ITEM #28075 |
|||||||||||||||||||||||
|
|
The PLS is used for production line cutting of fiberglass insulation. An electric eye controls the fully automatic run-out” and the cutting of the insulation. It requires 110v power service fused for 15 amps. A source of air is required. Specify the direction of work flow when ordering. ITEM #39075
- L TO R FLOW
|
||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||
| |Welcome| |Weld Type Fasteners| |Gold Seal Pins| |Mechanical Type Fasteners| |Adhesive Applicators| |Insulation Cutters| |Installation Machines| |Spot Welder| | |||||||||||||||||||||||||
