|
|
Duro Dyne Sheet Metal
Accessories and Equipment! |
Duro Dyne Portable Spot Welders
|
|
|
|
|
PORTABLE SPOT WELDER
TSP/TBW
Incorporated into each unit is a light weight solid state timer
which ensures consistent welds by eliminating the need for operator
judgement. Completely portable, the unit can be easily moved. Operation
is simple; a lever handle is depressed, as the handle moves downward the
welding tips close against the material to be welded. Upon closure the
lever handle contacts a “microswitch.” A timed burst of current far in
excess of 1000 amperes passes through the metal, heating it to its
melting point. Under constant pressure from the arms, the metal fuses
together. In most cases, the complete welding process takes a fraction
of a second. For heavy production usage optional water cooled arms
and tips are recommended.
ITEM #9200 - TSP1 - 110 Volt
ITEM #9201 - TSP2 - 220 Volt
ITEM #9202 - TBW - 220 Volt Hi Low
|
|
|
|
|
SPOT WELDER WITH
OPTIONAL STAND
A sturdy sheet metal stand is available which enables you to operate
your portable spot welder just as you would operate a stationary unit.
Press the foot pedal and the arms clamp together and perform the weld.
Release the foot pedal when the weld is complete. This allows the
operator two free hands for handling material. The welder slips onto the
stand and locks in position. It can easily be removed and operated on a
bench when needed.
MODEL #ST2
CODE #9203 |
|
WELDER TIPS ONLY |
|
STANDARD
TIPS |
WATER
COOLED TIPS |
 |
 |
|
DESC. |
ITEM # |
DESC. |
ITEM # |
|
MT3 |
9018 |
MT1 |
9019 |
|
|
 |
|
DESC. |
ITEM # |
|
MT2 |
9020 |
|
|
WELDER ARMS AND TIPS |
 |
|
STANDARD |
WATER COOLED |
|
LENGTH |
DESC. |
ITEM # |
LENGTH |
DESC. |
ITEM # |
|
6" |
S1 |
9012 |
12" |
S2W |
9022 |
|
12" |
S2 |
9013 |
18" |
S3W |
9023 |
|
18" |
S3 |
9014 |
|
 |
 |
|
STANDARD |
WATER COOLED |
|
LENGTH |
DESC. |
ITEM # |
LENGTH |
DESC. |
ITEM# |
|
6" |
A1 |
9015 |
15" |
A2W |
9026 |
|
15" |
A2 |
9016 |
18" |
A3W |
9027 |
|
18" |
A3 |
9017 |
|
|
|
|
SPECIFICATIONS |
|
ITEM # |
MODEL # |
VOLTAGE |
KVA AT DUTY CYCLE |
CAPACITY |
DESCRIPTION |
|
9200 |
TSP-1 |
110V AC
(50-60 cycle)
25 amp fuse |
2.5 7.5% |
Welds mild or stainless steel to
1/8" (combined thickness); galvanized up to two pieces of 18
gauge. |
Welder with built-in solid state
timer, less arms and tips. Includes 10' of line cord. |
|
9201 |
TSP-2 |
220V AC
(50-60 cycle)
15 amp fuse |
2.5 7.5% |
|
9202 |
TBW |
220V AC
(50-60 cycle)
15 amp fuse |
5.0 7.5% |
HI position: Welds mild or
stainless steel to 1/4" (combined thickness); galvanized to two
pieces of 12 gauge. Caution: Model TBW is too powerful to
weld light gauges without burning unless the timer is used in LO
position. LO position characteristics and capacity are same
as Model TSP-2 |
Welder with built-in solid state
timer, less arms and tips. Includes 10' of line cord. |
|
9202 |
HILO |
220V AC
(50-60 cycle)
15 amp fuse |
2.0 50% |
|
|
|
|Welcome|
|Weld Type Fasteners| |Gold Seal Pins| |Mechanical Type
Fasteners| |Adhesive Applicators| |Insulation Cutters|
|Installation Machines| |Spot
Welder| |
