|
 |
 |
| HOME | TIN KNOCKER | RAMS | DURO DYNE | USED | CONTACT US |
|
RAMS Sheet
Metal Equipment! |
|||||||||||||||||
|
RAMS 20 Ga. Power Flanger |
||||||||||||||||||
|
|
|
RAMS 2008 ONLY $965.00 + S&H This
unit can be mounted to the RAMS-2006 20 gauge Pittsburgh Machine. The
RAMS-2008 20 gauge Power Flanger will form a 7/32” right angle flange on
either straight or curved pieces. It has an adjustable “auto-guide”,
which can be set to automatically hold the metal for turning the flange
on both a radius or a straight piece. This unit features Torrington
needle bearings and hardened and ground shafts |
||||||||||||||||
|
|
|
|
||||||||||||||||
|
|
||||||||||||||||||
| |Welcome| |24 Ga Pittsburgh| |20 Ga Power Flanger| |20 Ga Stand Alone Power Flanger| |Drive Cleat Notcher| |Cheek Bender| | ||||||||||||||||||
