|
 |
 |
| HOME | TIN KNOCKER | RAMS | DURO DYNE | USED | CONTACT US |
|
RAMS Sheet
Metal Equipment! |
||||||||||||||||||||||||||
|
RAMS 24 Ga. Power Flanger |
|||||||||||||||||||||||||||
|
|
|
RAMS 2003 ONLY $875.00 + S&H This
unit can be mounted to the RAMS 24-28 Pittsburgh Machine. The RAMS-2003
Power Flanger will form a 7/32” right angle flange on either straight or
curved pieces. It has an adjustable “auto-guide”, which can be set to
automatically hold the metal for turning the flange on both, a radius or
a straight piece. This unit features Torrington needle bearings and
hardened and ground shafts. |
|||||||||||||||||||||||||
|
|
|
|
|||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||
| |Welcome| |24 Ga Pittsburgh| |20 Ga Pittsburgh| |24 Ga Power Flanger| |20 Ga Power Flanger| |20 Ga Stand Alone Power Flanger| |Hand Flanger| |Drive Cleat Notcher| |Cleat Bender| |Cheek Bender| |Crimper Beader| |20 Ga. Hyper Speed Pittsburgh| |16 Ga. Slitter| |S & Drive Machine| |Button Lock Machine| | |||||||||||||||||||||||||||
